SFCO One Shot Kill Tutorial

Found this on another site

to make one shot kill on the m16k, first open your nitepr, and go to your browser

to open nitepr press : + and -, and press "R" 3 times to enter the nitepr browser

ok, now under "Address" u will see 0x00004000(as default)

the M16K's address is 0x0078C630, so put that in under address

so, change the 00004000 to 0078c630

[Cheater] [Searcher] [PRX] [Browser] [Decoder] [Logger]
-----------------------------------------------------------
Address 000102030405060708090A0B0C0D0E0F ASCII
0x0078C630 4D31364B000000000000000000000000 M16K............
0x0078C640 0000000000000000AF54080000000000 ........>>T.....
0x0078C650 6D3136666C6F61742E736B6C00000000 m16float.skl....
0x0078C660 475F4D31364B00000000000000000000 G_M16K..........
0x0078C670 475F5249464C455F52454C4F41440000 G_RIFLE_RELOAD..
0x0078C680 73636F70655F7374616E646172640000 scope_standard..
0x0078C690 4E410000000000000000000000000000 NA..............
0x0078C6A0 00000000000000000000000000000000
0x0078C6B0 436C69705F5269666C65000000000000 Clip_Rifle......

ok, now go to Clip_Rifle (so go down 9)(press down 9 times)

ok, so Clip_Rifle will be zero, so...

go to "Clip_Rifle" , and count down 11 lines for the one shot kill address

so, 0,1,2,3,4,5,6,7,8,9,10,11

if u did it right, u shud be on the address

"0x0078C760"

to mod this address to make a one shot kill code...

make that 0x0078C760 to 0x0078C76C

so, go under the zero of it

0x0078C60

and change that "0" to a "C"

so it will now be

0x0078C76C

now, u got the first address

keep that address, becuz u need 3 more addresses to make the M16K have true one shot kill

now, here is my trick to get the next 3 lines

all u have to do is add 00000004 to the 0x0078C76C

so the next address will be

0x0078C770, now that is the second address

next will be the 3rd address for one shot kill, so add 00000004 to 0078C770

now the 3rd address will be 0x0078C774

for the final address add 00000004 to 0078C774

the fourth address will be 0x0078C778

now...

ive highlighted all the one shot kill addresses to green, so take those four addresses

and... put them in code format

#One Shot Kill M16K
0x0078C76C
0x0078C770
0x0078C774
0x0078C778

to complete this code and make a complete one shot kill hack, just add the "0xFFFF" value to each address to complete the one shot kill code

so....

#One Shot Kill M16K
;Credit xXDarkFlamezXx
0x0078C76C 0xFFFF
0x0078C770 0xFFFF
0x0078C774 0xFFFF
0x0078C778 0xFFFF

Credit goes to DFZ From HAXCOMMUNITY!